LF Inlay

LF Inlay

RFID INLAYS
Prelaminated inlays LFProduct Description Newbega’s prepressed inlays are designed specifically with the card manufacturer in mind. The inlay is engineered to remove process difficulties and offer an exceptional product. We make the card manufacturer’s job easier without sacrificing quality. Design & Applications Prelaminated inlays are suitable for use in the production of ISO standard cards. Newbega uses a proprietary manufacturing process to produce its prelaminated inlays. Only coil winding technology is used for this type of inlays. Our inlays are very robust and boast unequaled torsion / bending characteristics, extreme durability and optimized read / write performance. The inlays have a completely flat finish and bring numerous benefits to card manufacturers. Our prelaminated inlay is essentially a semi-finished product, so that the card manufacturer merely needs to collate his printed sheets with…
Read More
Prelaminated inlays Combi UHF

Prelaminated inlays Combi UHF

RFID INLAYS
Prelaminated inlays Combi UHFA prelaminated sheet which combines “traditional” LF and HF chip technologies with UHF (Ultra High Frequency) technology. Design & ApplicationsThis type of prelaminated sheet is designed in very close co-operation with our client. Testing of samples with requested combination is recommended before we start producing the whole batch.We are aware that smaller batches are often required for such combinations, which is why our production capability starts from a few hundred pieces rising to any quantity as requested. A typical example of the “Combi UHF” solution is a combination of physical access (based on HF or LF) with parking application based on UHF, allowing for a convenient access when entering the parking area without having to handle the card and tap it on the reader. Feature:Very reliable and…
Read More
Prelaminated inlays Combi

Prelaminated inlays Combi

RFID INLAYS
Prelaminated inlays CombiNewbega’s prepressed inlays are designed specifically with the card manufacturer in mind. Prelaminated inlays Combi consist of two or even more different chip technologies, offering combinations of HF + LF, HF + HF or LF + LF chips in one card. Even a contact chip module can be embedded if the layout is designed accordingly. Design & ApplicationsPrelaminated inlays are suitable for use in the production of ISO standard cards. Newbega uses a proprietary manufacturing process to produce its prelaminated inlays. Wire embedding and / or coil winding technologies are used depending on suitability.Our inlays are very robust and boast unequaled torsion / bending characteristics, extreme durability and optimized read / write performance. The inlays have a completely flat finish and bring numerous benefits to card manufacturers.Our prelaminated…
Read More
Prelaminated inlays Dual interface

Prelaminated inlays Dual interface

RFID INLAYS
Prelaminated inlays Dual InterfaceDual-interface prelaminated inlays incorporate an antenna serving the contactless interface of a single chip equipped with both contact and contactless interfaces. Design & ApplicationsWith dual-interface inlays it is possible to access the same chip using either a contact or contactless interface with a very high level of security. Two interfaces operate in compliance with two different standards: contact interface with ISO / IEC 7816, contactless interface with ISO / IEC 14443. These two interfaces share the same microprocessor chip, operating system and EEPROM.The chip of the dual interface inlays is embedded in an outer layer of PVC, PETG or polycarbonate in the same position as in contact cards. Feature:Very reliable and robust plastic packageHigh reading distance optimized to each chipMaterials: PVC, PETG, PCColor: white (other colours upon agreement)Different sheet formats are…
Read More
HF Inlay

HF Inlay

RFID INLAYS
Prelaminated inlays HFProduct DescriptionNewbega’s prepressed inlays are designed specifically with the card manufacturer in mind. The inlay is engineered to remove process difficulties and offer an exceptional product. We make the card manufacturer’s job easier without sacrificing quality. Design & ApplicationsPrelaminated inlays are suitable for use in the production of ISO standard cards. Newbega uses a proprietary manufacturing process to produce its prelaminated inlays. Wire embedding and / or coil winding technologies are used depending on suitability.Our inlays are very robust and boast unequaled torsion / bending characteristics, extreme durability and optimized read / write performance. The inlays have a completely flat finish and bring numerous benefits to card manufacturers. Our prelaminated inlay is essentially a semi-finished product, so that the card manufacturer merely needs to collate his printed sheets…
Read More
Prelaminated inlays Microprocessor

Prelaminated inlays Microprocessor

RFID INLAYS
Prelaminated inlays MicroprocessorDue to an increasing demand for chip performance, its functionality and security standards, contactless microprocessor chips with specific OS (Operating System) are used.Prelaminated inlays are suitable for use in the production of ISO standard cards. Design & ApplicationsThere has been a clear trend in the market over the last few years towards the use of contactless technology employing more and more applications, where only the contact chip was typically used in the past.We can offer chips (incl. chip module and OS) which can be sourced from different suppliers (chip manufacturers and OS developers). We are also ready to process prelaminated inlays made out of consigned modules provided by our clients.Newbega uses a proprietary manufacturing process to produce its prelaminated inlays. Our inlays are very robust and boast unequaled…
Read More