High Quality Wiegand Reader Smart RFID Access Control Card Reader

Additional Product Parameters

FrequencyFunctionProtocolWarrantyMOQ
125KHzRead and WriteISO 78161 Year1000pcs
Communication MethodWorking TemperatureUnlock MethodMaterialReading Time
Wiegand 26/34-20℃~70℃RFID Card or PasswordABS< 100ms

RFID Wiegand Reader Introduction

RFID Wiegand reader, a part of RFID access control system, can read RFID card data in Wiegand format and transmit it to the controller of RFID access control system; which can help the controller identifying the correct card number and issue a door opening command.

The N-SR006 Wiegand card reader can open the door by 3 different methods: by only card, by only password, or by card and password. Obviously, this access control card reader has replaced the traditional lock that needs a metal key, which is safer and more convenient.

wiegand reader door open methods

RFID Access Key Card for Wiegand Card Reader

The access key is usually a card at the same size as a credit card with a built-in T5577 rewriteable chip, and we usually rewrite its card number to WG26 format to suit for a Wiegand card reader.

 

Wiegand Reader Application Scenarios

  • Residential
  • Shopping mall
  • School
  • Government agency

 

  • Private office
  • Meeting room

 

Want to find a reliable RFID reader supplier to customize high qulity RFID Wiegand readers for you? Newbega, a professional access control card reader manufacturer with 20+ years industry experience, can offer you not only quality confirmed products but also good after-sales services. Want to have a try? Click the following “Inquire Now” button to contact us now~

Customizing Service

Available Crafts

Logo Silk Printing

Single Package Size

118mm*118mm*20mm

Single Package Weight

160g

Why Choose Us?

Previous slide
Next slide

How Use RFID Wiegand Reader

Enter Programming Mode

Operation steps: press [#] for 4 times→ red light off, green light on→ input 123456 (initial password)→ press [#]→ green light flashing→ entered into programming mode

Note: to enter programming mode is the essential step before all other operations.

Wiegand Reader Password Operations

Change Door Open Password

Operation steps:

press [6]→ input 6-digit new password→ press [#]→ input 6-digit new password again→ press [#] → password changed successfully

Press [6]→ press [#]→ [#]→ an empty password set successfully ( the function of opening the door with a password forbidden)

Note:

By default, you can use the 6-digit password to open the door under Password Mode.

If the passwords entered twice are inconsistent, the buzzer will make a long beep and the interface will automatically jump back to the programming main menu, then you need to press [6] again to continue the modifiation.

Modify Software Password

Operation steps: press [0]→ input 6-digit new password→ press [#]→ input 6-digit new password again→ press [#]

Following the 5 steps above, if the buzzer sounds twice, you can press [*], then the password will be successfully changed.

If the buzzer will beep once for a long time, and automatically jump back to the programming main menu, then you need to repeat the 5 steps mentioned above to take the password changing process again.

Change Card Password

Operation steps: press [*]→ swipe the effective card→ input intial passord 888888 or 6-digit present password→ press [#]→ input 6-digit new password→ press [#]→input 6-digit new password again→ press [#]→ changed successfully

Wiegand Card Reader User Operations

Add Single User

Operation steps: press [2]→ swipe the 1st card→ input 4-digit user NO.→ press [#]→ swipe the 2nd card→ input 4-digit user NO.→ press [#]→ swipe the Nth card→ enter 4-digit user NO.→ press[#]→ press [*] → all users have been added one by one successfully

Note:

2 beeps after swiping a card means the successful adding, while a long beep means that this card has already existed, and you can swipe the next one.

The default password for each card: 888888 (can only be used in the Card + Password Mode)

The user NO.: a non-repeatable 4-digit number from 0001 to 9999 (After entering the NO., a long beep means that this NO. has already existed or is less than 4 digits, and you need to keep inputting new ones until you hear 2 beeps.)

Add Users in Batches

Operation steps: press [1]→ swipe the 1st card→ swipe the 2nd card→ swipe the Nth card→ press [#]→ press [*]→ successfully added

2 beeps after swiping a card means successful adding; while a long beep means that this card has already existed before, and you can swipe the next one.

Note: the default password for each card is 888888, and you can only add these cards under the Card + Password Mode.

Delete User

Operation steps:

Press [3][0]→ swipe the 1st card....the Nth card→ press [#]→ deleted successfully (delete according to the card, support continuous delete)

Press [3][1]→enter the 4-digit user NO.→ press [#]→ deleted successfully (delete according to the user NO., support continuous delete)

Press [3][2]→ Enter 9999 → press [#] → all users deleted successfully

Access Control Card Reader Other Operations

Escape or Return

Operation steps: press [*] to escape current step.

Set Door Open Method

Operation steps:

Press [4][0][#]→ open the door with card or password (default)

Press [4][1][#]→ open the door with card and password

Press [4][2][#]→ open the door with password (the function of opening the door with a card forbidden)​

Additional Information

Delievery
By Express (3~7 days)

Cooperation: FedEx, DHL, UPS, TNT

By Air

About 2 weeks

By Sea

Fast Boat: within a month
Slow Boat: about 50 days

Click Here